Researchers have published a study in Scientific Reports detailing a computational fluid dynamics (CFD) approach to optimizing the aerodynamics of an electric bus to improve energy efficiency.

Electric buses encounter significant challenges regarding operating range and battery temperature, with aerodynamic drag forming a major component of energy demand at elevated speeds. To address this, the study analyzed a scale model of the BYD K9 using steady CFD simulations.

The research team evaluated structural features by altering them individually: windshield inclination, ground clearance, and the roof transition angle. Adjusting the windshield inclination decreased the drag coefficient. Increasing the ground clearance produced an additional reduction in drag alongside a decrease in estimated underbody convective heat transfer. Furthermore, implementing a modified roof transition delivered a significant single drag reduction while moving vehicle lift close to neutral.

By combining these geometry modifications, the final redesign successfully lowered the total drag coefficient—representing an overall reduction. According to the findings, this optimization cuts the simulated aerodynamic energy demand. The authors noted that the conclusions are based on steady, zero-yaw simulations without physical experimental validation.

Source: Published in Scientific Reports (nature.com) by Bereket Gebrehawerya Kahsay, Ataklti Dawit Fisha, and colleagues under a permanent DOI (https://doi.org/10.1038/s41598-026-81203-8).